Medusa PRO II Box is a brand new version of the professional phone servicing tool intended for a wide range of Samsung, Huawei, LG, Lenovo, Motorola, Oppo, Sony, Xiaomi, ZTE and other devices through USB, UFS and MMC interfaces. The main intended purpose of Medusa PRO II Box is repairing dead boots of the devices (mobile phones, PDAs, modems, etc.) or these devices recovery, until they become fully operational.
What`s new:
Hardware
- New ergonomic design
- More powerful hardware base that can be easily enhanced
- Faster interaction with PC (USB 3.0)
- Wide range of voltage regulation
- Introduced ISP method for UFS flash memory without desoldering
- Identification of external expansion boards (UFS, eMMC sockets, PIN-CONNECTOR, etc.)
- capable to work with other peripherals by means of PIN-CONNECTOR
- Advanced multicolor indication of operation modes
Software
UFS
- UFS operation modes: slow (PWM) and fast (HS)
- Read Android build info
- Main features:
- Read
- Write
- Wipe Data
- UFS Service Operations
- Distribute UFS Storage
- Configure UFS descriptors, attributes, flags
- Save/Write Config descriptors
- Save/Write attributes
- Save Flags
- Write OEM ID
- Format UFS (all active LUN)
- Read RPMB Counter
- Factory Repair of UFS flash memory
MMC
- Introduced ability to work with MMC by means of 8-bit bus
- Increased MMC data transfer speed
- Detection of eMMC socket connection
- BGA153/169
- BGA162/186
- BGA 529
- BGA 221
Medusa PRO II Box – All Features:
Medusa PRO II – Hardware Features:
- Fast USB 3.0 high-speed mode (+USB 2.0 compatibility)
- UFS data transfer speed 55 MB/s (writing) / 100 MB/s (reading) and more
- depends on PWM/HS working mode and flash storage speed
- 1-bit, 4-bit and 8-bit MMC buses supported (40 MB/s and more)
- speed depends on bus width and flash storage speed
- In System Programming (ISP) now possible for MMC and UFS flash memory types
- without desoldering, if there is a technical capability to solder by means of PIN-CONNECTOR expansion board
- All output voltages (VCC, VCCQ, VCCQ2) regulation within operation range 1.2…3.3V
Medusa PRO II – Software Features:
- Full-featured professional software
- Supports all operations (Read, Write and Edit) with any required memory partition via UFS, MMC, and USB interfaces.
- Service operations with UFS memory
- Divide flash memory into LUN units
- Work with descriptors, attributes, flags
- Write OEM ID
- Erase memory on all active LUN
- Read RPMB Counter
- Service operation with MMC flash memory
- Edit: geometry, partitions, CID, CSD and other data registers
- Restore/Update flash memory firmware
- Read/View Extended CSD registers
- Format flash memory
- Simple intuitive GUI interface suitable for both beginners and experts
- Quick device restoration by means of SRF files
- SRF files contain partition data as well as other useful information (help files and diagrams)
- SRF data are compressed (to increase performance)
- Built-in Partition Manager
- Partition Manager allows you to edit the required partitions and save changes thus improving user experience. Plus, you will be able to open Full Flash binary files, edit the file content and save the edited file back on the device.
-
Additional information
Weight 2 kg
Reviews (0)
Reviews
There are no reviews yet.